Before Use; Cautions Regarding Handling; Safety Instructions - JB Systems MCD 300 Mode D'emploi

Masquer les pouces Voir aussi pour MCD 300:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
OPERATION MANUAL
FEATURES
• Full MP3 Playback (max. 999 MP3-files / 255 Folders on 1 CD)
o MPEG1 layer3 (32 + 44,1 + 48kHz)
o MPEG2 layer3 (16 + 22,05 + 24kHz)
o MPEG2.5 layer3 (8 + 11,025 + 12kHz)
• Supports both CBR and VBR bit rate modes.
• Reads CD-DA, CD-R, CD-RW
• Anti-shock Memory 10seconds
• 1/75sec Frame search, also on MP3
• Pitch ranges: +/-8% +/-12% +/-16%, also on MP3
• Pitch bend on jog wheel and buttons for perfect mixes
• Auto cue function (-48dB)
• 4 different speed scan
• Selectable elapsed, remain and total remain time display
• Pitch display.
• Single/continuous play
• S/PDIF digital output on RCA/cinch
• 60 seconds Transport Protection
• 20 tracks program play

BEFORE USE

Check the contents:
Check that the carton contains the following items:
• MCD300 player
Operating instructions
• Pair of cinch cords
JB SYSTEMS®
USER MANUAL
1/38
MCD300
ENGLISH

CAUTIONS REGARDING HANDLING

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric
CAUTION
shock, do not remove any cover. No user-
serviceable parts inside. Refer servicing to
qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying this appliance.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Do not place metal objects or spill liquid inside the unit. Electric shock or malfunction
may result.
INSTALLATION GUIDELINES:
• Placing and using the unit for long periods near heat-generating sources such as
amplifiers, spotlights, etc. will affect its performance and may even damage the
unit.
• Take care to minimize shocks and vibrations during transport.
• When installed in a booth or flight case, please make sure to have good ventilation
to improve heat evacuation of the unit.
• To avoid condensation to be formed inside, allow the unit to adapt to the
surrounding temperatures when bringing it into a warm room after transport.
Condense sometimes prevents the unit from working at full performance.
• Choose the place where you put your installation very carefully. Avoid presence of
heat sources. Avoid places with vibrations or places that are dusty and humid.
• The player will work normally when installed on a surface with max. 15° inclination.
• Be very careful while handling CDs, do not touch them with wet or dirty hands.
• Discs that are dirty must be cleaned with special designed cloth and cleaning
products.
• Do not use CDs that are badly damaged (scratched or deformed) they can damage
your appliance.
• To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
• In order to prevent electric shock, do not open the top cover. If a problem occurs,
contact your dealer.
• Do not place metal objects or spill liquid inside the CD player. Electric shock or
malfunction may result.
• This CD player uses the semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a room of 5°C – 35°C.
• The compact disc player should not be adjusted or repaired by anyone except
properly qualified service personnel.
• This unit may cause interference to radio and television reception.
JB SYSTEMS®
USER MANUAL
2/38
MCD300

Publicité

Table des Matières
loading

Table des Matières