Nordmende CRT 21-29 Manuel D'utilisation page 12

TELETEXT East/West: Press [V+] / [V-] key, TXT east and west will change as follows: East
Using the [P+] / [P-] key, select the BLUE BACK , using the [V+] / [V-] key,, select the "ON" or "OFF".
Select RT CLOCK (real time clock)menu by pressing [V+] / [V-] key on remote or on TV set.
RT CLOCK displays the time broadcasted by TV station.
Press [V+] / [V-] key, on remote or on TV set to select CLOCK.
Press [V+] / [V-] key, on remote or on TV set to select OFF, 24Hrs or AM / PM.
TIME displays the time set by user as a Current Time.
Press [V+] / [V-] key, on remote or on TV set to select Hours and set hours by [P+] / [P-] key on remote or on TV set. Hours can
be set from 00÷23 .
Press [V+] / [V-] key, on remote or on TV set to select Minutes and set minutes by [P+] / [P-] key on remote or on TV set.
Minutes can be set from 00÷59 .
Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit.
3-5 TUNING MENU
Select the Tuning menu by pressing the [ MENU ] and [V+] / [V-] key, on remote or on TV set .
Pressing the [P+] / [P-] key, highlighted item will move up and down.
PROGRAM NO.
Press [P+] / [P-] key to select "Program No".
Press [V+] / [V-] key, to select a program.
PROGRAM NAME
This setting is necessary if you would assign the name to a program (max 7 char.)
Select the Program Name by pressing the [P+] / [P-] key on remote or on TV set.
Press [V+] / [V-] key on remote or on TV set to write the channel name
Select the characters/numbers by pressing the [P+] / [P-]-keys on remote or on TV set (you can shift by pressing [V+] / [V-]
key.
Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit
COLOUR SYSTEM
Function: Select correct colour system. This setting is necessary if the picture is not reproduced Correctly
Using [P+] / [P-] key to select "COLOUR SYSTEM".
Repeatedly pressing [V+] / [V-] key,to change as follows:
By default this is set to "AUTO". If proper colour do not appear change the colour system.
SOUND SYSTEM
Funcion: Select correct sound system. This setting is necessary if the sound is not reproduced Correctly
Using [P+] / [P-] key to select "SOUND SYSTEM".
Repeatedly pressing [V+] / [V-] key, to change as follows:
AUTO BG
By default this is set to "AUTO". If there is no proper sound then change the sound system.
AUTO SEARCH (ASM)
Press [P+] / [P-] key, to select "ASM".
Press [V+] / [V-] key to start "ASM" and all available channels will be memorized.
Wait until function has finished.
MFT (FINE TUNING)
Function: fine Tuning for current setting.
Select the Channel No. in Directory Menu or selecting it by pressing numeric keys.
Using [P+] / [P-] key, select "MFT".
Using [V+] or [V-] key, adjust for best tuning.
AFC (Automatic Frequency Control)
Using [P+] / [P-] key, select "MFT".
Using [V+] / [V-] key, select ON or OFF
SKIP
You can skip unwanted channels .
The skipped channels will not be selected with [P+] / [P-] key on remote or TV set, but skipped channels can be selected by
pressing skipped program number by direct digit number selection keys on remote.
1. Select the channel number to be skipped with [P+] / [P-] key on remote or on TV set.
2. Press [P+] / [P-] key on remote or on TV set to select Skip function in Tuning menu
3. Press [V+] / [V-] key, on remote or TV set to switch it ON.
4. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit
5. The number of channel will change colour, from yellow to red
6. To unskip the channel follow the above steps by selecting skipped Channel No. and select Skip parameters, press [V+] / [V-]
key, on remote or TV set to switch Skip to OFF.
7. The number of channel will change colour, from red to yellow.
LOCK (channel lock) is used to lock or unlock channels not desired. This function is active only if CHILD LOCK is ON.
Press [P+] / [P-] key, to select "LOCK".
Press [V+] / [V-] key to set LOCK ON or OFF.
PAN-EUROPEAN
AUTO NTSC-4.43
I DK L/L' BG NICAM
CYRILLIC GREEK
PAL 4.43 SECAM SECAM-L/L'
10
West