English; Quick Reference - Philips SBC SP 370 Mode D'emploi

English

INTRODUCTION
Congratulations on your purchase of the Philips Power switch (SBC
SP370). This switch can be used together with a Philips Power remote
control (SBC SR315). With the Power Remote Control system you can
operate electrical appliances (e.g. lamps, coffee-maker etc.) in and
around your house via the remote control without getting out of your
chair! Before connecting an appliance to the Power switch, please
read this document carefully.

QUICK REFERENCE

1. Make sure the house code of the new Power switch is the
same as with the used remote control (fig.1) .
2. Connect the Power switch to a mains power outlet (fig. 2) .
3 Select the appliance, e.g. a lamp, you want to control and
plug it into the Power switch (fig. 2) .
• Check the power consumption of the selected appliance
before plugging it into the Power switch. This Power
switch can control appliances with a maximum power
rating of 1000 Watts!
• If the selected appliance has its own ON/OFF switch,
make sure it is switched on.
4. Use the remote control to operate the appliance (fig. 3) .
The Power switch operates with button 1 as its default
setting.
If the right side (+) of the button is pressed, the appliance
switches on. If the left side (-) of the button is pressed, the
appliance switches off again.
4