Dispensing Hot Water Into A Mug - Keurig Hot K200 PLUS Série Guide D'utilisation Et D'entretien

BREW YOUR FIRST K-MUG™ POD
1. Remove Drip Tray and securely insert an
empty travel mug.
3. Select the brew size you would like
under brew setting #2.
2. Select a K-Mug pod, place firmly in the
™
Pod Holder and lower the Handle.
CAUTION: There are sharp needles that puncture the K-Mug
pod above and below the Pod Holder. To avoid injury, do not put
your fingers in the Pod Holder.
4. Press the Brew Button and enjoy your
first travel mug of coffee!
CAUTION: There is extremely hot water in the K-Mug pod
™
during the brew process. To avoid injury, do not lift the Handle
during the brew process.
14

DISPENSING HOT WATER INTO A MUG

1. Place a mug on the Drip Tray. Lift and
lower the Handle without a pod.
™
3. Select your Brew Size and press the
Brew Button.
1 | LET'S GET BREWING!
2. Press CONTINUE to dispense hot water.
4. When the brew process is complete,
the Touch Display will indicate Enjoy!
15