Publicité
Les langues disponibles
Les langues disponibles
1. Assemble the Pole
Slide the ceiling plate to the pole.
Match the ceiling base holes (as shown in the diagram) according to the thickness of TV.
F
G
＜80mm
S
Q
N
U
J
2. Attach Ceiling Plate to the Concrete Ceiling
3
80-110mm
＞
110mm
1:1
60mm
45mm
(1.8")
(2.4")
ø 12mm
(ø 1/2")
1
V
Mark the
exact location of
mounting holes
2
Drill pilot holes
W-A
S
Installers must verify that the supporting surface will safely support the combined weight of the equipment
and all attached hardware and components.
Insert the expansion bolts into the hole as shown.
Once inserted, remove the washers and hex nuts.
Attach the hex nuts to the expansion bolts corresponding
to the keyhole pattern found on the ceiling plate. Do not
overtighten and leave a small gap so the ceiling plate will
slide into the keyhole slots.
WARNING
4
Publicité
