Safety Precautions; Symbols Used In The Manual; Symbols On The Implement - Grizzly Tools EGT 1036 Traduction De La Notice D'utilisation Originale

GB
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety precautions

This section deals with the basic
safety regulations while working
with the electric garden hoe.

Symbols used in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the
instruction is explained at
the place of the exclamation
mark) with information on
preventing damage.
Help symbols with information
on improving tool handling.
64

Symbols on the implement

Caution!
Read the user manu-
al
Caution! Protect from
rain and damp
Wear safety goggles
Wear ear protection
Danger of injury from ob-
jects spinning off! Keep
surrounding persons away
form the hazard area
Caution! Switch off the tool
and disconnect it from the
mains before carrying out
any cleaning or mainte-
nance work
Danger from damaged
mains cable! Keep mains
cables away from tines
Danger of injury from ro-
tating parts. The tines will
continue to rotate after the
tool has been switched off.
Wait for them to stop mov-
ing
Working depth
Working width
L
Sound power level L
WA
dB
Safety class II
Turning direction
in dB
WA