Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Wetted Component
Polyacetal, Polypropylene, Polyethylene, PVC and Viton
Recommended Use
Water-based media, detergents, soaps, antifreeze, windshield washer, Lubricants, Agricultural
Chemicals, Insecticides, Fungicides, Fertilizers & Herbicides, Adblue, Urea, DEF etc.. Pump should
only be used with non Inflammable liquids
Do not use with:
Any media not compatible with materials used in the pump construction. These pumps must never
be used for Fuel Transfer or with Thinners, Solvents etc.
Assembly and Pump Operation
1. Pump comes with a 2 part Suction tube. One tube is telescopic in nature & should be used
when using the pump on smaller 5-16 gal. (15-50 liters) drums. When using the pump with
55 gal. (205 liters) drums assemble the other suction tube also with the telescopic suction
tube & extend it fully. Tighten the connections gently so as not to shear the threads
2. Now screw the Suction tube to the ¾" female threaded opening at the pump inlet.
3. Insert the complete pump assembly (Pump & Suction tube together) into the drum from the
2" threaded opening on the drum
4. Tighten the 2" Bung Threads on the pump onto the threaded opening on the drum
5. Pump has a Built-in Lock Nut which can be turned & used to position the pump outlet on the
drum
Révision n°01
7
Publicité
Table des Matières
