Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. Connect the Corrugated discharge hose using the Hose Clip onto the Pump
Outlet
7. Loosen the Air Vent Cap on the Pump outlet if you wish to manually operate the pump. If
Siphon action is desired, tighten the cap fully
8. Start operating the pump handle, making sure that the corrugated discharge tube has it's
end in the receiving container
9. Within a few strokes, pump will start dispensing media
10. If Air Vent cap is in the fully closed position, pump will keep dispensing even without
operating the pump handle until the media level in the supply container becomes equal to
the media level in the receiving container. Siphon action can at any time be stopped by
opening the air vent cap
11. For best results , pump should be used for pumping only 1 type of media
Révision n°01
8
Publicité
Table des Matières
