ProBreeze 850 Mode D'emploi page 4

TROUBLESHOOTING
Problem
Switch is not
illuminated when
turned on.
The steamer heats
up but there is no
steam.
The steamer flow
light is flashing
3 | English
Possible Causes
The steamer is not plugged in.
The household circuit breaker has
been tripped; there is a blown fuse
in the electrical circuit.
The water reservoir is empty.
There is mineral or lime scale
buildup in the steamer.
There is mineral buildup in the
steamer.
Solution
Plug the steamer power cord
into an electrical outlet.
Reset the household circuit breaker or
replace the blown fuse. Contact an
electrician or your area's electrical provider.
Refill the water reservoir.
Remove the mineral buildup.
It is normal for the flow of the steam to
stop for a few seconds. If it stays off for
longer periods, check for mineral buildup.