Technical Data - ALFRA 41100.A Mode D'emploi

Technical Data

Prod.-No.:
Designation:
Breakaway force:
(at 0° inclination to the load)
Max. load-bearing capacity:
(at 90° inclination of the load)
Max. load-bearing capacity:
(at 90° inclination of the load)
Dead weight of the unit:
Storage temperature:
Operating temperature:
Markings on the magnetic clamp
Detailed descriptions for handling and operating conditions of the TMC 300 can be found on the upper side of the
magnetic clamp. This labeling must not be modified, damaged or removed. New labels must be ordered from the
manufacturer if necessary.
Laser marking incl. serial number
on the upper side of the cap
Start-up
You have received a pre-assembled adjustable welding angle and a detailed operating manual. Please check the
condition of the goods upon receipt for any damage incurred during transport, and make sure the delivery is
complete. If you have any problems, please contactthemanufacturerimmediately.
41100.A
Adjustable welding angle
per TMC >300 kg on 6 mm S235
30% of the breakaway force
per TMC 100 kg on 6 mm S235
2.75 kg
-30°C to +60°C
-30°C to +60°C
Sticker "Safety instructions"
>660 lbs on 0.25" AISI CRS 1020
30% of the breakaway force
220 lbs on 0.25" AISI CRS 1020
6.1 lbs
-22°F to+140°F
-22°F to+140°F
Prod.-No.: 189414246
12