Panasonic TX-55CRW434 Mode D'emploi page 26

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The 3D glasses may not operate correctly out of the
viewing range. Use the 3D glasses within the viewing
range. The range may be shortened depending on the
obstacles between the TV and the 3D glasses, or the
surrounding environment.
Cleaning and maintenance of the 3D glasses
• Do not apply spray cleaners directly onto the surface
of the 3D glasses.This may result in discoloration
and cracks and may cause the screen display to
peel off.
• Make sure the cleaning cloth is soft and does not
contain any foreign material or dust. Using a dirty
cloth will damage your 3D glasses.
• Do not drop or bend the 3D glasses.
Viewing 3D images
Incoming video signals can either be in 2D or 3D
format. A 2D signal can be viewed in either 2D or 3D,
and 3D can be viewed in either 2D or 3D. If the 3D
Mode option in the 3D Settings menu is set to Auto,
the TV can detect the 3D signal and change to 3D
mode automatically. Otherwise you can change the
viewing mode from the 3D Settings menu manually.
The format of the 3D signal can be either Side By
Side (SBS) or Top Bottom (TB). You may have to
choose the correct format using the 3D Mode option
if the TV can not detect it automatically.
Moreover, when viewing in 2D, you can change 2D
images to 3D images by enabling the Virtual 3D
option in the 3D Settings menu.
3D format
Side By Side
Images for the left and right eyes are positioned
(SBS)
side-by-side.
Images for the left and right eyes are positioned
Top Bottom (TB)
at the top and bottom of the screen.
Changing 3D format from the Option Menu
Press the Quick Menu button on the remote to open
the Option Menu. Select 3D Mode option and set
as you want.
Watching 3D images in 2D format
First off all the TV should be in 3D mode. Select 2D
Only option in the 3D Settings menu using the Up or
Down buttons. Press Left or Right buttons to set 2D
mode as Left, Right or Off.
Watching 2D images in 3D format
Select Virtual 3D option in the 3D Settings menu
using the Up or Down buttons. Press Left or Right
buttons to set.
Switching left and right images
The left and right eye shutter timing of the glasses
can be swapped. If 3D images look blurred, switch
the left and right sides of the 3D image.
Select Left/Right Swap option using the Up or Down
buttons. Press Left or Right buttons to set as Left/
Right or Right/Left.
Description
English - 25 -
3D Settings
3D Mode
You can customize the 3D mode settings to provide
the best viewing experience. Select one of the
following modes to experience 3D image viewing:
Auto: Automatically switches to 3D mode if 3D
information is detected from a digital broadcast or a
HDMI source.
Side by Side: Displays 3D content which is originally
in a form of side by side.
Top bottom: Displays 3D content which is originally
in a form of top and bottom.
Off: 3D function is turned off.
2D Only
If content is 3D but you want to watch it in 2D, you can
switch to 2D Only mode. There are 2 options (LEFT
and RIGHT) to select which side of the content you
want to watch in 2D.
Virtual 3D
Conversion from 2D to 3D. You can enable or disable
this feature by setting as On or Off. Or depending on
model, you can set the level of depth of field to various
settings or turn it off.
Left/Right Swap
You can use this setting to shift the phase of the 3D
left/right broadcast.
3D Depth Sense (depending on model)
This setting enables the control of 3D depth.
3D Viewing Information
Refer to the size/distance guidelines below to
experience 3D in the best possible way.
Viewing Distance
Size
23 26
32 37
(inch)
Viewing
distance
(m)
Horizontal Viewing Angle
39 40 42 46 47 48 50 55 65

Publicité

Table des Matières
loading

Table des Matières