Technical Data - Climadiff CLS12H Notice D'utilisation


Regularly inspect the door seals and ensure that they are still closing properly. If this is not the case,
contact your after-sales service.
Trouble shooting

Any electrical work should be carried out by a qualified and skilled technician.

The appliance should be repaired by an accredited repair center, using only manufacturer's original
spare parts.
The appliance is designed for home use only. The manufacturer declines any liability whatsoever in the case of
other utilization.
This appliance meets the requirements of all applicable European directives and their amendments.

2. TECHNICAL DATA

Below is an example of the nameplate:
The nameplate attached to the inside or rear of the appliance (depending on the model) includes the
entire information specific to your appliance.
We recommend that you make a note of its serial number in this booklet prior to installation, so that
you can refer to it later (technical work, request for assistance, etc.).
Once the appliance is installed and loaded, access to it is not so easy.
CAUTION: no assistance can be provided without this information.
15