Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
INSTALLATION GUIDELINES
DANGER TO LIFE:
This unit may only be installed and electrically connected by an
authorized and qualified electrician!
Electrical installation should strictly follow all safety rules and
technical norms for electrical installations in your country!
The complete installation should be approved by an authorized
expert before it will be taken into operation! Each change to an
existing installation should be re-approved as well!
MAINS INPUT: the unit should be connected to the mains via a 5pole 380-400V 32A CEE socket. The
maximum overall power is 22.080Watt which may never be exceeded!
OUTPUTS: each phase is connected via 2 separate 16A output sockets. The maximum power per phase
is 7.360Watt, each 16A output socket support maximum 3.680Watt which may never be exceeded!
MAINTENANCE
DANGER TO LIFE:
Switch the unit off and unplug the mains cable BEFORE servicing!
During inspection the following points should be checked:
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
Clean with a soft cloth using normal glass cleaning products.
Always dry the parts carefully.
The unit and its installation conditions should be inspected and approved every 3 months by an authorized
expert!
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
BRITEQ
®
OPERATION MANUAL
5/30
PD-32A / PD-63A
ENGLISH
SPECIFICATIONS
PD-32A
Power Input:
IEC60309-standard, CEE-32A industrial plug
380V–400V / 50Hz, 3phase, 5wire (3P+N+E)
Maximum overall power:
22.080Watt (3x 32A)
Maximum power per phase:
7.360Watt (32A)
Maximum power per output:
3.680Watt (16A)
Protection class:
class I (only to be connected to class I outlets)
Max. Leakage current:
30mA
Automatic fuses / phase:
2x C16 (I
Diameter Power cord:
5x 6mm² (H07RN-F 5G6)
32A-wires: 10AWG (5,2mm²) – 16A-wires: 14AWG (2,1mm²)
Diameter internal wiring:
Size:
see drawings
Weight:
7,4 kg
PD-63A
Power Input:
IEC60309-standard, CEE-63A industrial plug
380V–400V / 50Hz, 3phase, 5wire (3P+N+E)
Maximum overall power:
44.160Watt (3x 63A)
Maximum power per phase:
14.490Watt (63A)
Maximum power per output:
22.080Watt (3x 32A)
Protection class:
class I (only to be connected to class I outlets)
Max. Leakage current:
30mA
Automatic fuses / phase:
2x C32 (I
Diameter Power cord:
5x 10mm² (H07RN-F 5G10)
Diameter internal wiring:
63A-wires: 6AWG (13,3mm²) - 32A-wires: 10AWG (5,2mm²)
Size:
see drawings
Weight:
10 kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
BRITEQ
®
OPERATION MANUAL
=16A, instantaneous tripping current = 5x I
)
n
n
=32A, instantaneous tripping current = 5x I
)
n
n
6/30
PD-32A / PD-63A
Publicité
Table des Matières
