Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION GUIDE
Installation Opening
This unit can be installed in any dashboard having an opening as shown below. The dashboard should
be 4.75mm - 5.56mm thick in order to be able to support the unit.
UK
If the opening is too small, carefully cut or file as necessary until the sleeve easily slides into the open-
ing. Do not force the sleeve into the opening or cause it to bend or bow. Check for sufficient space
behind the dashboard for the unit chassis.
Install the unit
Important: Remove the two screws on the top of the unit before installation.
Otherwise, the player will not work.
1. Inset mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver.
Make sure that lock lever is flush with the mounting collar (not projecting outward).
2. Secure the rear of the unit. After fixing mounting bolt and power connector, fix the rear of the unit to
the car body by rubber cushion.
3. Insert trim plate.
18
270114_CR210GP_manual 01 UK_DE_FR.indd 18
183mm
Mounting bolt
rubber cushion.
Remove the
two screws.
lock lever
1
2
3
CR210GP
1/27/14 11:38 AM
Publicité
Table des Matières
