Num'axes TEL1050 Guide D'utilisation page 16

 Vertical height measurement mode
This mode calculates
Aim at the bottom of the target and then make a long press on the « ON» button. When
"bottom" and "scan" appear on the screen, the rangefinder begins to measure the distance
to the bottom of the target. When the distance to the bottom is measured, the screen
displays "up" and "scan", then begins to seek the top of the target. The vertical distance
(height) will then be displayed continuously on the screen.
 Speed mode
A long press of about one second on the « M » MODE button allows you to change the unit
of measurement (kilometers or miles per hour - KM/ H or M/H).
Press the « ON» button to measure the speed of the target. Aim at the moving target twice.
The speed of the moving object will be displayed.
8. Range accuracy
The ranging accuracy of the product is plus or minus 1 m/y under most circumstances.
The product measures the time a laser beam takes to travel from the rangefinder to the
target and back. The maximal range may vary according to climatic and environmental
condition, as well as the color, surface finish, size, shape and other characteristics of the
target.
TEL1050 - Indice A – Avril 2020
Bottom
and displays
Top and vertical height
the vertical distance (height).
16/47