Remote Control - Soundcore Infini Mini Guide D'utilisation

EN Placement
1. Place the Soundbar on a solid surface.
2. To prevent any hazardous situations, no naked flame sources, such as
lighted candles, should be placed on or in the vicinity.
• Wall Mount Installation
1. Drill two holes on the wall (approximately 6mm in diameter). The
distance between the two holes should be 400mm. Refer to image below:
Insert the two screw plugs into the drilled holes, then place the two screws
in the screw plugs.
03
400mm
2. Tighten the screws with screwdriver and leave 4mm screw head outside.
4mm
3. Hang the Soundbar on the wall.

Remote Control

1. Battery installation
EN
04