Ypbpr Input Source - ConMed Linvatec VP4726 Manuel D'instruction

W41-147-004AA.book Page 15 Wednesday, February 18, 2009 2:47 PM
PIP Menu
❶
LAYOUT - Changes the OSD layout (Single, PIP,
PBP1, PBP2).
For each LAYOUT selection, the following Sub-menus
are available:
❷
SOURCE - Changes the secondary source.
❸
SIZE - Changes the PIP size (Small, Medium,
Large).
❹
POSITION - Changes the PIP location.
➎
SWAP - Swaps the position and size of the Primary
and Secondary image.
1.9.3

YPbPr Input Source

Adjust Menu
❶
BRIGHTNESS - Increase or decrease the
brightness (Range: 0~100).
❷
CONTRAST - Increase or decrease the contrast
(Range: 0~100).
❸
SHARPNESS - Adjust the sharpness of the video
image (Range: 0~100).
❹
SATURATION - Changes the tone of the color
(Range: 0~100).
➎
COLOR - Changes the richness of the color
(Range: Green 0~50, Red 0~50).
➏
BACK LIGHT - Increase or decrease the back
light dimming level (Range: 0~100).
❼
PHASE - Increase or decrease the phase level
(Range: 0~100).
E-15
E