Monitor Operation - ConMed Linvatec VP4726 Manuel D'instruction

W41-147-004AA.book Page 9 Wednesday, February 18, 2009 2:47 PM
1.8

Monitor Operation

1. Connect the DC input jack to the DC IN
connector on the back of the monitor.
2. Plug the female end of the AC Power Cord
into the AC Inlet of the DC Adapter.
3. Plug the AC Power Cord into a Hospital
Grade outlet.
4. Connect the appropriate video source to the
monitor.
5. Apply power to all connected peripheral
devices.
6. Turn the monitor on by pressing the power
switch on the back of the monitor.
7. Set your preferred settings using the On-
Screen Menus listed on the following
pages.
E-9
E