ITS EKSELANS MD HD EASY PLUS Manuel D'installation page 7

Power supply connected
HDMI source detected
•
Press while connecting the power supply
Factory default values "rs" will appear on the
display.
•
Note: In case of using more than one
modulator for the same receiver or TV set, it
is necessary to modify the "Program ID" so
that they have different values.
•
Press for menu options
•
Press for:
•
Setting the output channel [5...12 + 21...69]
•
Setting the IR carrier frequency [38 / 46 / 56 KHz]
•
Setting the program identifier [1...34]
•
Setting the desired output atenuattion [0...15 dB]
•
If a USB memory stick containing a file named "Video01.ts" is connected,
•
The file will be played when pressing
•
The file will be created or overwritten when pressing
•
Press for finishing the recording or playing
•
Playing, recording and stopping require confirmation. Press
•
Yes
•
No
•
For advanced settings,
download the SW
"MDHDSoft" from the website:
www.ekselansbyits.com
and connect the modulator
to the computer by using a
Type A / Type B USB cable.
EN
6