Alarm Function; Cleaning And Maintenance - AEG DAB 4138 Mode D'emploi

English
42
DAB + FM Menu (SYSTEM)
The following submenus can be found in the SYSTEM menu.
• Time: Set the time and the date manually. You can also
set the automatic update and the display format of the
date.
- Set Time/Date: Here, you can manually set the time
and date.
- Auto update: Here, select the source from which the
automatic update of time and date should be carried
out. Select from: Update from all sources, DAB only,
FM only and no update.
- Set 12/24 hour: Select between 24 hour and 12 hour
display.
NOTE: In 12 hour display
AM = morning, PM = afternoon appears.
- Set date format: Select between the two options for
displaying the date. Day-Month-Year or Month-Day-
Year.
• Backlight: Set the time after which the display light
should be dimmed. If "ON" is selected, the display light
remains on permanently.
• Factory reset: Select the "YES" command if you want to
reset the device again to the factory defaults. All settings
which you have made will be lost.
• SW version: Here, you can display the Software Version
of the device.

Alarm function

You can set the device in such a way that it switches on at a
specific time.
• To select an option, press the / buttons (3).
• Select an option with the REPEAT ALARM/SELECT but-
ton (9).
Setting the alarm time
1. Press the ALARM ON/OFF button (10). "ALARM 1
SETUP" appears on the display.
2. Now set the alarm time.
3. DURATION: Set the time, after which the device will
switch off automatically.
4. SOURCE: Select a source by which you want to be awak-
ened. Select from: BUZZER (beep), DAB, FM.
4a If DAB or FM has been selected, now select the desired
radio station which should play when the set alarm time
is reached. Select from: LAST LISTEND and the preset
radio stations on the station buttons.
5. Select the time at which the alarm time needs to be acti-
vated. Select from: DAILY, ONCE, WEEKENDS, WEEK-
DAYS.
5a If ONCE is selected, now set the date at which you want
to be awakened.
6. Finally select the volume at which you want to be awak-
ened. The lowest volume is indicated by four blocks.
7. Activate the alarm time by selecting "ALARM ON".
After you have made all your settings, the message "ALARM
SAVED" briefly appears. The activated alarm function is
shown on the display by the " " symbol.
Turn off the alarm signal
To shut off the alarm signal, press the ALARM ON/OFF but-
ton (10).
Snooze
The automatically set alarm function can be shut off for 5 or
10 minutes. Press the SLEEP button repeatedly to select the
desired time.
NOTE:
If the Snooze function is activated, the time until the next
alarm is shown on the display.
Deactivate alarm function
1. Press the ALARM ON/OFF button (10).
2. Press the button.
3. Use the / buttons to select "ALARM OFF". Confirm
with the REPEAT ALARM/SELECT button.

Cleaning and maintenance

CAUTION:
Do not immerse the device in water.
• Disconnect the mains plug before cleaning.
• You may wipe off external stains, using a slightly damp
cloth without any additives.
Troubleshooting
Problem Cause
The unit cannot The unit is blocked
be operated and "hangs"
No DAB Radio Telescopic antenna
reception incorrectly aligned
No Digital Radio
can be received in
your area
Solution
Pull the mains plug
for approximately 5
seconds. Then connect
the unit again
Reset the device to the
factory defaults. see
"Settings menu"
Fully extend the
telescopic antenna and
align it vertically.