Manuels Connexes pour Pulse Shower Spas 1021-SSB
Sommaire des Matières pour Pulse Shower Spas 1021-SSB
- Page 1 Aloha Shower System Système de douche Aloha Model #1021-SSB Modèle N°#1021-SSB PW-91021-1525BSS Owner's Manual Manuel du propriétaire...
- Page 2 Aloha Shower System/PW-91021-1525BSS Please Read The Following Instructions COMPLETELY Before Beginning! Veuillez lire les instructions suivantes COMPLÈTEMENT avant de commencer! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
- Page 3 Shower System Parts Legend 1. Shower System........1 11. Retaining Washer ......1 19. Non Slip Washer ......2 12. Mounting Plate ........ 1 20. 1-3/8" Machine Screw ....2 2. Shower Arm ........1 13. Inlet fitting with flow restrictor 21.
-
Page 4: Installation Instructions
Installation Instructions Instructions d'installation BEFORE YOU BEGIN AVANT DE COMMENCER Measure the following to ensure your Shower System will fit properly. Mesurez les points suivants pour vous assurer que votre système de douche s'ajustera correctement. New Construction Retrofit Nouvelle construction Rénovation 28”... - Page 5 Installation Instructions Instructions d'installation Step 1 Step 2 Étape 2 Étape 1 Step 3 Étape 3 Step 2 Étape 2 Step 1 Étape 1 Back of Aloha Arrière d'Aloha Mixing valve Clapet mélangeur (NOT INCLUDED) (NON INCLUS) [Step 1] Apply a generous amount of PTFE (plumber's) tape (23) to end [Step 1] Secure shower arm (2) onto unit by tightening brass nut (6) on the back of unit.
- Page 6 Installation Instructions Instructions d'installation Drill-less Option Option sans perçage Figure 1 Adjusting mounting plate position Réglage de la position de la plaque de montage Back of mounting plate [Step 1] Remove face of tape (14) from mounting plate (12), apply glue Connect main supply line (25) to brass nipple (13).
- Page 7 Installation Instructions Instructions d'installation Insert washer (7) into the hex end of the handshower hose (22). Attach Product Fully Assembled. hose to handshower (21) outlet located on the bottom of the diverter. Insert washer (7) into the tapered end of the hand shower hose (22) and Produit entièrement assemblé.
-
Page 8: Utilisation
1. Defects Covered; Warranty Period: Pulse Shower Spas, Inc. (“Pulse”) warrants to the 1. Défauts couverts; Période de garantie: Pulse Shower Spas, Inc. (« Pulse ») garantit à l'acheteur original consumer purchaser who purchases this shower spa (the “Product”) for use in his final qui achète ce spa de douche (le «...