Assembling And Dismantling Of Wheels - Aria 1.0 Mg Manuel D'utilisation

7.3 ASSEMBLING AND DISMANTLING OF WHEELS

Dismantling of rear wheels
Press on the quick-release pin and extract the wheel at
the same time.
2
Removing the casters
Unscrew the axle shaft with a special Allen key and
remove the wheel.
2
ENG 62
WARNING!
Danger of tipping!
If the quick-release axle of the rear wheel is not completely blocked, the wheel
can fall off during use. This can cause tipping. Always verify that the quick-
release axles are completely blocked every time you assemble a wheel.
1
1
Assembling of rear wheels
Press on the quick-release pin and position the wheel at
the same time until the pin blocks it.
2
1
Assembly the casters
Follow the disassembly process on the contrary, taking
care to tighten the axle pin securely.