Publicité
Les langues disponibles
Les langues disponibles
Repeat the operation once or twice if necessary, before using the heated water.
Use
Repeat the operations described above: note that the kettle must be filled to
between the minimum and maximum levels.
If you do not require very hot water, stop the heating process by turning off the
switch.
After use: remove the kettle from the base before pouring out the water and
disconnect the plug from the power socket,
After use, do not leave water in the kettle. Drain it completely to prevent the
water from stagnating and reduce limescale furring.
During long periods of inactivity, remove the plug from the electric socket. Wind
the power cord around the supports provided in the base.
Thermal safety device
The kettle is equipped with a thermal safety device which cuts out the heating
element in case of overheating, if the kettle is accidentally switched on when
empty. To return the appliance to operation, switch it off, remove the plug from
the power socket and wait for it to cool (about 10/15 minutes); fill the kettle with
water, connect the plug and start the appliance by pressing the button to the I
position.
Descaling
To extend the kettle's lifetime, remove limescale regularly (at least once a month
or more often if the water is very hard)
6.
Fill the kettle about three quarters full with water and bring to the boil.
7.
After switching the kettle off (remove the plug from the power socket), add
white wine vinegar (8 degrees) or a descaler (specifically for kettles) to the
maximum level (1.7L/max).
8.
Leave the solution to stand for about 4/5 hours.
9.
Empty the kettle and rinse thoroughly.
10. Fill the kettle with clean water and bring to the boil.
CLEANING AND MAINTENANCE
Warning: before cleaning the appliance, remove the plug from the power socket
and wait for it to cool. The kettle requires frequent, thorough cleaning to prevent
limescale furring and unpleasant smells.
Do not immerse the appliance (kettle and base) in water or any other liquid and
do not wash it under running water or in a dishwasher
Wash only the inside of the kettle and the filter with hot water and ordinary
washing-up liquid, rinse them carefully and allow them to drain. Do not use
powders, abrasive or corrosive products or metal scouring pads. Before using it,
check that all external electrical parts (switches) are perfectly dry.
15/36
Publicité
