Menabo PADDY SMART PAD Manuel D'utilisation page 9

The device shall remain in such mode until the alarm is deactivated by pressing the
button on the device or by removing the child from the car seat. PADDY ALERT will
reconnect via sound and light signal when it re-approaches the associated PADDY
SMART PADS. To cancel all the pairings to the PADDY SMART PADS, press the button on
the PADDY ALERT until the confirmation beep is heard. This operation is only possible
if the paired PADDY SMART PADS do not detect the presence of the child on the device.
To check the battery status, press the PADDY ALERT button, the LED will flash from 1 to
4 times. If it flashes only once, the battery needs to be replaced. However, if the battery
charge is equal to or less than 20%, the LED will flash continuously, along with an alarm
tone, warning that the battery needs to be replaced.
Important: False alarms may occur due to disturbances in the Bluetooth
signal.
9