Wellcare WE-167OBHD Mode D'emploi page 15

Temperature settings :
4 = maximum warmth
3 = moderate warmth
2 = minimum warmth
1 (sleep sense mode) = minimum warmth
0 = OFF
Attention : The lowest temperature settings,
setting 1 & 2, are recommended for continuous
use and sleeping.
In order to warm up the blanket faster, it is
recommended to initially set the temperature at
the highest setting.
APS (Active Protection System) – 3-Color LED
This electric blanket is equipped with APS (Active
Protection System) (3) technology which detects
errors on the operation or component failures.
By the 3-color LEDs (3) which can be seen from
both sides of the controller and the beep sound,
APS can help you to operate this blanket easily
and safely.
Green – Your blanket has reached the desired
•
temperature level
Orange – Your blanket is heating up to reach
•
the desired temperature level
Due to the temperature variation in different
environments (room, bed, etc.), an orange light
may be lit on APS display to indicate continuous
heating during the blanket is in use. That said,
GB
15