Alarm Function - CTC FU 7025 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1. Press and hold the TIME button for about 3 seconds until the time display format
(24 Hr) in the display starts flashing.
2. Now you can set the time display format (24 Hr or 12 Hr), time zone, hours, minutes,
year (yr), month (M), day (D) and the day of the week display language with the
buttons UP and DOWN. For the weekday language you can choose from the
following languages: GER = German, ENG = English, ITA = Italian, FRE = French,
DUT = Dutch, SPA = Spanish, DAN = Danish.
NOTE:
• Time zone 00: The Central European Time "CET" (UTC+1) is the default setting.
Even when the device receives a radio signal later on, the manually set time zone
is maintained.
• The input is stored automatically within approximately 30 seconds when no button
is pressed.
• Setting of the weekday is done automatically.
• If 12 hour is selected, the following will appear: PM = afternoon
NOTE: Important!
The alarm time cannot be set, activated or deactivated whilst the device is searching
for a radio signal.
Setting of the Alarm
1. Press the ALARM button for approximately 3 seconds. The display shows " " and
the number of the actually set alarm time starts to flash.
40
FU7025_IM_CTC - 107x107mm

Alarm Function

23.01.18

Publicité

Table des Matières
loading

Table des Matières