Important Information For Initial Operation; Mounting The Wheels; Mounting The Stand - erba V-400/8/50 Mode D'emploi

GB - INSTRUCTION MANUAL

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

Check the product for transport any damage. Notify the carrier if you find any transport damage.
Check the oil level of the compressor before useage. (Image K)
Position the compressor as close to the working area as possible to avoid long air hoses and
extension cords.
Intake air must be dry and clean.
After filling the air tank the compressor engine must cool down for 2-5 minutes to avoid over-
heating.

Mounting the wheels (3)

The enclosed wheels have to be mounted according to images C and D.

Mounting the stand (16)

The enclosed rubber stands have to be mounted according to image E.
Mounting the air filter (1)
Remove the transport plug using a flat screwdriver or a similar tool (image F). Screw the air filter to
the compressor as shown in image G.
Mounting the oil plug (12)
Remove the transport plug using a flat screwdriver or a similar tool (image H). Put the oil plug firmly
into the opening.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 20
Changes, print, punctuation and other errors reserved!
Instruction manual
17012
Issue: 01/2017