Processing Food - Alecto BFP-88 Mode D'emploi

6.

PROCESSING FOOD

1. Fill up the mixing cup with the food that you want to process. Only fill up the
mixing cup half way for the best mixing results.
2. Screw the blade unit onto the mixing cup unit in a clockwise direction until tighte-
ned.
3. Turn the mixing cup around so that the blade unit points downwards and place it
on the right upper side of the blending compartment of the BFP-88.
4. Turn the mixing cup clock wise until the marking triangle points towards
the lock sign.
5. Place the power cord into a 230V electrical wall outlet.
6. Press button to start the blender, press the
der. You can blend manually using the P button (press to start blending and let
go to stop blending). (*)
NEVER BLEND LONGER THAN 10 SECONDS. THAN PAUSE AND
BLAND AGAIN FOR A PERIOD OF 10 SECONDS MAXIMUM.
7. Take the power cord out of the electrical wall outlet.
8. Turn the mixing cup counter clock wise in order to move the triangle
towards the open lock sign and take the mixing cup off the blender.
9. With the blade unit at the top, turn the mixing cup counter clock wise in order to
remove the blade unit.
10. Now you can use the blended food or put a lid on the mixing cup to store or take
it with you.
Take note: the mixing cups are not freezer proof. If you would like to store the
food in the freezer you need to keep it in another container.
*: If you hear a beep tone while pressing the P button or
the blade unit has not been placed correctly. Make sure the blade unit has been
placed correctly on the mixing cup and the tab has been turned into the right position
( ).
:
Start/stop blending
button again to stop the blen-
button the mixing cup with
36
P: manually blending