Normal Use; Contents; Technical Data; Specific Technical Data (Pure Sinusoidal Wave) - AEG 10057 Mode D'emploi

Normal use

The power inverter is intended to convert 12 V
direct current voltage to
•
alternating current voltage 230 V/50 hz and/or
•
direct current voltage of 5 V/max. 2.1 A (2.0 USB).
The voltage converter is only intended for perma-
nent installation.
This device is not intended for use by children or
persons with limited mental capacity or lacking
experience and/or lacking expertise. Children should
be supervised to ensure they do not play with the
device.
This device is not intended for commercial use.
Any other use or modification of the device is con-
sidered improper and involves significant risks. The
manufacturer assumes no liability for damages due
to improper use.

Contents

Check the package contents immediately after un-
packing. Check the device and all parts for damage.
Do not use a defective device or parts.
•
Power inverter with 12 V connector
•
Cordless remote control module
•
2 cables with ring lugs/clamps
•
operating instruction
Please include all relevant documentation to other
users!
The operating instructions are also available at the
following Internet address:
http://iuqr.de/ModifiedConverter

Technical data

Model
Rated input voltage
Output
Output voltage
Wave form
Ambient temperature
Overvoltage protection
undervoltage protection
Overheat protection
Input voltage range
Low battery shutdown
Frequency cordless remote
control module
Max. transmission power

Specific technical data (pure sinusoidal wave)

Model
Item number
Continuous power output
Peak power output (0.1
sec.)
Dimensions in mm
Weight
Overload protection
Fuse
English 19
1000 W 1500 W
12 V DC
230.0 V AC / 50 hz;
uSB: 5.0 V DC
uSB: 2.1 A
Sinusoidal wave
0˚C - 30˚C
15.5 V ±0.5 V
10.0 V ±0.5 V
<68 ˚C
11 - 15 V DC
10.0 V DC ±0.5 V
433,92 Mhz
-49,65 dBm
1000 W 1500 W
10057 10058
1000 W 1500 W
2000 W 3000 W
320 x 200 360 x 200
x 70 x 70
2,25 kg 2,75 kg
1100 W 1650 W
±100 W ±150 W
4 x 40 A 6 x 40 A