König Electronic KN-DVBT-IN61L Mode D'emploi page 3

Installation 1: Powered by DTV set-top box (Fig.1)
Please note that in this installation, you need to make sure that your set-top box (STB) can support
coaxial cable 5V DC powering via the IEC connector to the antenna.
Step 1: Take out the antenna main unit and accessories from the box.
Step 2: Connect the antenna and the DTV set-top box (1) with the coaxial cable
Step 3: Connect the DTV set-top box to your TV (2). Please make sure the coaxial cable powering
function of your STB is ON. (Please check the operation manual of your STB for coaxial cable
powering function)
Step 4: Adjust the antenna (turn around the antenna body in different directions or put it vertically or
horizontally) in the best position for receiving of digital TV signal. (It is recommended to place the
antenna near the window where the digital TV signal comes in).
Step 5: To be neat, tidy and safe, organize the coaxial cable.
Fig.1
Installation 2: Powered by AC/DC adapter (Fig.2)
Step 1: Take out the antenna main unit and accessories from the box.
Step 2: Connect the antenna and the DTV set-top box (1) with the coaxial cable; or, connect the
antenna directly with your TV (in that case, skip Step 3 and go to Step 4).
Step 3: Connect the DTV set-top box to your TV (2)
Step 4: Connect the power adapter DC output jack to the DC input connector of the antenna, and then
plug the AC/DC power adapter into the AC power socket. (3)
Step 5: Adjust the antenna (turn around the antenna body in different directions or put it vertically or
horizontally) in the best position for receiving of digital TV signal. (It is recommended to place the
antenna near the window where the digital TV signal comes in.).
Step6: To be neat, tidy and safe, organize the Coaxial Cable.
Fig.2
Note: After finish the installation, you can use your set-top box to check the signal strength and quality.
If you cannot have a stable image, please move the antenna to a better position for signal reception
(Note: this antenna can be placed vertically or horizontally for signal reception, as shown in Fig.3).
When you find the best position, please fix it.
3