Product Features - König Electronic KN-DVBT-IN61L Mode D'emploi

Indoor DVB-T antenna
Introduction:
This is an antenna specially designed for digital terrestrial TV broadcasting reception. It is the best
solution for home reception and digital portable TV reception. The antenna is an active antenna that
can be used with TV or set-top box which supports coaxial cable powering, or using a power adapter
for external powering. Desktop stand for vertical or horizontal mounting is included.
Technical Data:
Frequency range: VHF: 40-230 MHz
UHF: 470-790 MHz
• Gain: 28dB
• Max. Output level: 100dBµV
• Power supply: Via separate AC/DC adapter
(DC 6V/100mA) or via DTV
Set-top box (DC 5V/40mA)
• Impedance: 75Ω
• Noise Figure: ≤3dB

Product features:

• SMD circuit technology design
• Shielded for minimum interference
• Built-in high gain and low noise amplifier
• Portable for mobile use (camping, boating, etc)
• Horizontal or vertical positioning for best possible reception
• Powered by DTV set-top box or the included separate power adapter
• Stylish and compact size design with modern shiny black finish
• Especially compatible with HDTV of various digital terrestrial signals (DVB-T, ISDB-T, DMB-T/H,
ATSC) and DAB/FM radios.
Installation:
Note: For the best reception, please check the following conditions:
1. Keep the antenna away from the sources of interference: keep the
antenna away from those big power consumption devices, such as air
conditioners, elevators, hair dryers and microwave ovens...etc.
2. Place the antenna near a window when using the antenna in an indoor
environment.
3. Install the antenna as high as possible: in digital terrestrial reception, if
there are some interceptions between the antenna and the
transmission tower, it will cause temporary signal loss. So if the
antenna is installed as high as possible, those interceptions will be
reduced.
ENGLISH
Included in Package:
Before starting your installation, please
check the contents.
1. Antenna main unit
2. AC/DC power adaptor
2
DC power input
Vertical or
Horizontal setup