König KN-BM40 Mode D'emploi page 4

Open the "uCare Cam" App and select:
4
Click here to install the new Wi-Fi Camera:
In the screen of the Camera List Window (see Figure 1).
5 In the following screen select the tab:
6
then select the tab:
to enter the next step (see Figure 2).
Follow the instructions in the Camera List window step by step (see
Figure 3 and Figure 4). Please enter a personal camera name and
password (default 0000).
You are encouraged to change the default password after setup for
security purposes.
7
Click the tab:
(see Figure 5). The uCare Cam will automatically enter the viewing
window (see Figure 6) and the IP baby monitor status LED will turn
orange.
4
ENGLISH