Dyson SuperSonic Guide D'utilisation page 6

Masquer les pouces Voir aussi pour SuperSonic:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If your appliance cuts out,
unplug it from the mains supply
socket and leave to cool.
7. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-out,
this appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on and
off by the utility company, or
plugged into any socket where
the electrical supply is unstable
or likely to be turned off.
8. When the appliance is used
in a bathroom, unplug it after
use since the proximity of water
presents a hazard even when
the appliance is switched off.
For additional protection when
the appliance is used in a
bathroom, it is recommended
that a Residual Current Device
(RCD), with a residual operating
current not exceeding 30 mA
is installed in the electrical
circuit supplying the bathroom.
Contact a qualified electrical
installer for advice.
9. Do not use the appliance
for any other purpose than
drying hair.
10. Do not handle any part of
the plug or appliance with
wet hands.
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Supersonic hd04

Table des Matières