Filter/Dust Sensor/Anion Producer Cleaning And Maintenance - GUTFELS LR67013we Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fresh Air Healthy Life
Filter/Dust Sensor/Anion Producer
Cleaning and Maintenance
1. Pre-filter (approximately twice per month)
-
Clean the surface of the filter with a vacuum cleaner or wash with
water. Allow to dry thoroughly.
2. Cellular -Activated Carbon, cold catalyst filter (approximately once
every two months)
-
Clean the dust from the front of the filter with a vacuum cleaner.
-Place the filter in a ventilated area, this will allow harmful gasses
and germs to dissipate. Do not place under too much sun
exposure.
-The filter is delicate. Do not press too hard on the filter while
vacuuming.
-Do not use water to clean this filter.
3. Antibacterial cotton, HEPA filter (approximately once every two months)
-
Place the filter in a ventilated area, this will allow harmful
gasses and germs to dissipate. Do not place under too much sun
exposure.
-Do not use water to clean this filter.
4. Anion producer cleaning and maintenance.
-
When you hear the machine produce a creaking sound,
use a #1 or #2 paintbrush as a cleaning tool. Insert the
brush from the ventilation window above the anion
emission head.
Regularly clean the dust all aroundthe emission head.
Pinsel
33
5. Particulate sensor (approximately once every two months).
Wipe the lens with a dry cotton swab periodically to remove any dirt. (Moisture or
tobacco smoke residue may cause it to no longer work properly). First remove the
particulate sensor cover, use a dry cotton swab to wipe the lens.
-Do not insert the cotton swab into any area other than the lens.
-Be sure to unplug the power cord.
-If you are unable to see clearly, please use a light.
※Friendly Reminders:
-Before cleaning and maintenance, unplug the power cord.
-Do not operate the machine in absence of a filter. It will not be able to remove
the dust. Dust taken into the machine may cause malfunction.
-When not using the machine for a long period of time, please unplug it. Power is
also consumed while in standby mode.
-You may need to replace filters sooner depending on where and how you use the
appliance (such as a household with a large smoking population or areas with
higher air pollution). Replace the filter if filtration is not noticeable.
ENG
Cotton Swab
34

Publicité

Table des Matières
loading

Produits Connexes pour GUTFELS LR67013we

Table des Matières