I TUTTOFARE YUP000001 Manuel D'instruction page 12

12
MULTI-PURPOSE KITCHEN ROBOT
CAUTION: Sharp blades. Be careful when handling the inserted blade in order to prevent any cut injuries.
•
Switch off the device before inserting or removing the blades insert.
CAUTION: Danger of scalding! Do not process any hot food in the device as it could spurt out during sed.
•
The food must not be hotter than 50 . Allow hot food to cool down before you process it with the device.
• Before switching on the device, make sure that the lid ring is correctly places on the mixing container.
• Take off the mincing attachment if you are using the device as a blender. Otherwise there may be overheating
or damage to the motor.
• The devise is equipped with overload protection: the device switches off if it is overloaded. In this case, move
the switch to position 0, pull the plug out of the plug socket and allow the device to cool down for around 10
minutes. The device is then ready to be used again.
The blender attachment is suitable for pureeing smoothies made from fruit and vegetables
and for chopping up hard foods such as hard cheese, nuts, chocolate or ice cubes.
1. Grab the blender components which are shown in the adjacent
illustration.
2. Place the blade insert into the threaded ring.
3. Place the sealing ring onto the blade insert.
4. Screw the threaded ring onto the bottom of the mixing container.
Check it to make sure it fits place securely.
5. Place the motor unit on a flat, stable and dry work surface Press the
motor unit down slightly until the suction feet stick to the work surface.
6. If the mincing attachment is fitted to the motor unit, press the release
button and as you do this twist the mincing attachment clockwise until
it can be removed
7. Insert the cover into the mincer mount and twist it anti-clockwise as far
as it will go to secure it in place.
8. If the cover has been fitted to the blender mount on the motor unit,
twist it a litter anticlockwise and remove it.
9. Place the threaded ring with the mixing container into the blender
mount. The locking lugs on the threaded ring must be plugged into the
matching recesses on the blender mount.
10. 1Press down the mixing container and twist it anticlockwise as far as it
will go.
USE
• Fill the mixing container with food which you want to chop up. Puree or blend.
• Place the lid ring onto the mixing container and press it on securely.
• Place the lid insert into the lid ring in such a way that the locking lusg are sunk in the matching recesses in the
lid ring. Then twist the lid insert clockwise to secure it in place.
• Insert the mains plug into a properly installed plug socket that is easily accessible.
• Switch on the device:
• -For normal mode. Flip the ON/0/P switch to position ON.
• -For pulse mode(in interval),flip the ON/0/P switch to position P and hold it pressed down, When you let go of
the switch , the device switches off. Pulse mode is suitable for chopping up hard foods and ice cubes. Even
fairly large food(quantities) are chopper up evenly if you flip the ON/0/P switch to position P a few times in
succession.
• You can add ingredients through the opening in the lid ring during operation. To do this , twist the lid insert
anticlockwise and remove it.
• Once the food has been processed, switch off the device(in normal mode flip the ON/0/P switch to the 0
position) and pull the mains plug out of the plug socket.
• Twist the mixing container anticlockwise and remove it from the motor unit.
• Open the mixing container and remove the items that have been blended.
• Clean all used parts.
• Insert the cover into the blender amount on the motor unit. The arrows on the cover and the motor unit must
point towards each other and the locking lugs must be sunk in the recessed. Then press the cover down and
twist it clockwise as far as it will go.
MINCER
• Do not attempt to force food down the feed chute of the mincer; this may damage the device!
• CAUTION: Danger of injury! Never push food into the feed chute using your hand or any objects other than the
plunger which is supplied!
INSTRUCTION MANUAL