Add i n g A n ot h e r B a t o n t o t h e Spe a k e r's F a vo rit e s List
1. Plug in your speaker, if necessary.
2. Plug your Baton into your device.
3. Begin playing your music, video, or game.
4. Press the speaker's Connect button twice
to search for the new Baton. When in search
mode, the Connect button light turns amber.
When the Baton connects with the speaker,
the light turns bright amber.
5. Press and hold the speaker's Connect button
to add the Baton to the speaker's Favorites
list. When the Baton has been added to the
Favorites list, the Connect button light turns
bright white.
Each speaker can remember up to 10 Batons in
its Favorites list.
6
Korus V400 and V600 Series Wireless Speaker Owner's Manual
9901297_Rev-A2_Korus_V400_V600_Owners_Manual_29-Apr-2013_v21.indd 6-7
Note: To remove an active Baton from the
speaker's Favorites list, press and hold the
speaker's Connect button. The light flashes
red when the Baton has been removed.
Note: To return to the original factory state,
press the speaker's Connect button six times.
This will clear the speaker's Favorites list.
Product: KORUS
Document: User's Guide
Color Side 1: Black; front cover bleeds all sides
Flat size:
14 x 4 in.
Color Side 2: Black; back cover bleeds all sides
Finished size:
7 x 4 in.
S witc hing Betw ee n Prev iously Configure d Batons
1. Plug in your speaker, if necessary.
2. Plug your Baton into your device.
3. Begin playing your music, video, or game.
4. Press the speaker's Connect button once
to search for a previously configured Baton.
When the Baton is connected with the
speaker, the Connect button light turns bright
white.
Note: Press the speaker's Connect button
multiple times to cycle through three or more
configured Batons.
Note: Press the speaker's Connect button four
times to start "Play All" mode. The Connect
button light turns red. The speaker
Korus V400 and V600 Series Wireless Speaker Owner's Manual 7
36-page self cover
saddle-stitched booklet
6620 Cypresswood Drive
Suite 120
Spring, TX 77379
832.717.4331
will automatically connect with an active Baton
stored in the speaker's Favorites list. Press
the Connect button again to disable "Play All"
mode. The Connect button light turns white.
Using a 3.5mm A ud io Ca ble
(not include d)
If you are going to use a 3.5 mm audio cable to
connect to the speaker, it will have priority over
the wireless Batons.
5/23/2013 4:31:24 PM