Publicité
Note: Some options shown below may not be included-depending on configuration ordered. Some steps may not be necessary.
1
Install legs
X 2
Side mounting screw
3
Connect cords to control box
Control
button
Note: Be sure the legs are
perpendicular to the worksurface. If
they are not, loosen the side mounting
screws, adjust the leg and re-tighten.
(6) #14 x 7/8" PHSM
• Make sure all connections are secure.
• Use pinetree clips to secure cords.
Control box
Leg #1
2
Install control button
#8 x 5/8" PHSM
Optional
battery
Leg #2
To
Control
Box
Control
button
AC
plug
0190797R4 Page 3 of 8
Publicité
