Pioneer DEH-S4000BT Mode D'emploi page 32

Menu Item
BT MEM CLEAR
[YES], [NO]
PHONE CONNECT
[IPHONE]*, [ANDROID], [OTHERS]
* Only for DEH-S4000BT/S040BT
P.APP AUTO ON
[ON], [OFF]
USB AUTO
[ON], [OFF]
* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once
the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may
continue to draw power from the battery if your vehicle's ignition does not have an ACC (accessory)
position.
Information on the connections for each device
The available sources differ depending on the setting value.
Please set [PHONE CONNECT] according to the table for the source you want to use.
For details on Pioneer ARC APP connection, see page 23.
NOTE
iPhone-related menu items in the following tables are not available for DEH-S3000BT.
Description
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED] appears when data is successfully
deleted.
Select the type of device and the appropriate
connection method according to your device.
See page 32 for details on the connections for
each device.
• Select [OTHERS] when you connect a mobile
device other than iPhone/Android.
Select [ON] to automatically launch Pioneer ARC
APP when an Android device is connected to the
unit via AOA. (Only available when [APP CONTROL]
is selected in [PHONE CONNECT].)
Select [ON] to automatically switch to [USB]
source when a USB device/iPhone is connected
to the unit.
Select [OFF] when a USB device/iPhone is being
connected to the unit just for charging.
- 32 -