How To Use Guide - Romus VI-D4 Mode D'emploi

Battery Status
ON/HOLD
Button
Picture below illustrates meter's front and back panel with most important elements marked:
To turn on the meter press ON/HOLD button.
•
To set the scale press SET button. There are several available scales :
•
- Beton CM (0-6%H2O)
- Anhydrite Screed CM (0-3.5% H2O)
- 0.3-15.3 Scale (0.3-15.3m)
- Relative Scale (0-100%)
Name of chosen scale will appear in the scale indicator field.
To see detailed description of each scale go to Available scales section.
To set the mode of measurement press ON/HOLD button. There are 2 available modes:
•
The display color will change depending on which mode was chosen.
To see detailed description of each mode go to Modes & functions section.
INDICATEUR D'HUMIDITE VI-D4 | Rèf. 93270

How to use guide

Scale Indicator
Set Button
- Normal
- Max. Hold
Spring
Electrode
Sensor
Plate
12