PULOX PO-250 Mode D'emploi page 27

When the user choose to turn on the synchronizing display
function on computer, it will probably take several seconds for
the data to appear on the computer screen.
E. Menu operation
On the measuring interface, the display direction changes according to
the handing direction.
Press the button with a prolonged push (1 second) to enter the
Settings Menu Interface (see Figure 6).
The user can setup the following parameters in the Settings Menu –
Turn on alarm, turn on pulse sound, alarm high-low limits, data storage
(recording).
Please note in the Settings Menu:
CLICK = short press of button and PRESS = prolonged push of button
(1sec).
a) Alarm setting
On the main menu interface, click the button to select "Alarm", Press
the button (1sec) to enter the alarm setting interface as shown in
Figure 7:
a. Adjusting the high and low limits of alarms
On the alarm setting interface, Click the button to select "Dir",
then Press the button (1sec) to enter the alarm direction setting
interface as shown in Figure 8:
Figure 5. SpO
Figure 6 Main Menu Interface
Figure 7
program
2
EN