Technical Specifications; Electrical Wiring - NISBETS ESSENTIALS CT917 Mode D'emploi

UK

Technical Specifications

Model Voltage
220-240V~
CT917
50/60Hz

Electrical Wiring

This appliance is supplied with a 3 pin BS1363 plug and lead.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection
being required they must be readily accessible.
Compliance
The WEEE logo on this product or its documentation indicates that the product must not
be disposed of as household waste. To help prevent possible harm to human health and/
or the environment, the product must be disposed of in an approved and environmentally
safe recycling process. For further information on how to dispose of this product correctly,
contact the product supplier, or the local authority responsible for waste disposal in your
area.
Nisbets Essentials parts have undergone strict product testing in order to
comply with regulatory standards and specifications set by international,
independent, and federal authorities.
Nisbets Essentials products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of Nisbets Essentials.
Every effort is made to ensure all details are correct at the time of going to press, however, Nisbets Essentials reserves the right to change
6
CT917_ML_A5_v4_20210521.indb 6 CT917_ML_A5_v4_20210521.indb 6
Power Current
2100W 9.1A
specifications without notice.
Dimensions Weight
h x w x d (mm) (kg)
290 x 440 x 280 8
2021/5/21 11:51 2021/5/21 11:51