Cleaning, Care & Maintenance; Crumb Tray - NISBETS ESSENTIALS CT917 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Cleaning, Care & Maintenance
Warning:
Always turn off and disconnect the appliance from the power supply before cleaning.
Always allow the appliance to cool before cleaning.
Clean the interior of the appliance as often as possible.
Do not use abrasive cleaning agents. These can leave harmful residues.
For stains on the interior walls, wipe with a cloth damped with some mild soapy solution. Ensure no
moisture enters the inside of the cabinet.
Always wipe dry after cleaning.
A Nisbets Essentials dealer or qualified technician should carry out repairs if required.
Cleaning the grill rack
After use, remove the grill rack from the appliance for cleaning.
Clean using warm, soapy water. Rinse thoroughly and dry well.
Re-locate into the appliance.

Crumb Tray

Periodically remove the crumb tray and empty.
Clean the crumb tray using warm, soapy water.
Re-locate into the appliance.
WARNING: DO NOT remove the tray during or immediately after use as it is still hot.
Troubleshooting
If your Nisbets Essentials appliance develops a fault, please check the following table before making a call to
the Helpline.
Fault
Probable Cause
The unit is not
The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Power supply
The unit is switched
Faulty heating tubes
on but appliance
Faulty control knobs
does not heat up
CT917_ML_A5_v4_20210521.indb 5
CT917_ML_A5_v4_20210521.indb 5
Solution
Check the unit is plugged in correctly and switched on
Call Nisbets Essentials agent or qualified technician
Replace the plug fuse
Check power supply
Call Nisbets Essentials agent or qualified technician
Call Nisbets Essentials agent or qualified technician
UK
5
2021/5/21 11:51
2021/5/21 11:51

Publicité

Table des Matières
loading

Table des Matières