Alarm Control - Decotech LT030 Mode D'emploi

The mechanism is repeated until the last clock and calendar element.
Press the
Setting the alarm
1. To activate / desactivate the alarm, press M (the bell icon appears) then the button
function).
2. To set the alarm, press M (the bell icon appears) and
display.
3. Press
confirm using
using
Setting the snooze function
To activate / desactivate the snooze, press M (the bell icon appears) and
snooze icon Zz will appear / disappear.
Stopping the alarm and snooze function
When alarm rings, it can be stopped by any button. If the snooze function is activated, it
means that the alarm clock will rings again after the snooze time you chose. The snooze
function is repeated any time you want until you press
The temperature is automatically updated. You can choose between reading the temperature
in F ° or C °. Press the
You can use your LED lamp desk to charge any smartphone or tablet with a compatible USB
charging cable.
Connect your device to the USB charging cable (not included) and connect the USB plug into
the USB charging
Note: USB output is 5V
• Wattage: 7W
• USB port 5V
LT030IM1347_V07_217.indd 9
button to select between 12 / 24h mode and press M to confirm.

ALARM CONTROL

, the music note icon will appear / disappear, as well as the snooze icon (see snooze
/ to set the hours and confirm using
. Press /
. Press / to set the melody among the 8 choices. Press
THERMOMETER CONTROL
button to select one of the two options.
DEVICE CHARGING
.
1A on normal operation.
1A
. The time will start blinking on the
. Press
to set the snooze duration (1 to 60 minutes) and confirm
. Pressing
SPECIFICATIONS
• AC/DC Adaptor: Input: 100-240V~, 50/60Hz, 0.35A, 12W
Output: 12V 1.0A
• Lumen: 350lm
9
ENGLISH
/
/ to set the minutes and
to confirm.
/ . The
, stops the alarm.
21/8/17 5:46 pm