Installation Instructions - Intenso PREMIUM Instructions D'utilisation

Installation Instructions

System Requirements:
This external SSD is compatible with the operating systems MS
Windows 7 / 8 / 8.1 / 10 and Mac OS 10.x.
Please note:
For the USB 3.0 operation an USB 3.0 interface card is needed. The
external SSD is downward compatible with the anterior USB standards.
The hardware configuration of your PC and the used operational system
can influence the compatibility of the external SSD.
Connect the external SSD
To connect the external SSD with your computer, please use the supplied
USB cable. Connect the USB 3.0 plug with Intenso SSD and the plug of
the USB cable end with your computer.
The computer automatically detects the "New Device" and installs the
driver. Please wait until driver installation is completed. Your computer
now shows an additional drive named "Intenso".
As soon as the external SSD is connected with the computer, the LED is
illuminated. The LED flashes, when writing or reading procedure is
carried out.
Trademark: Windows 7 / 8 / 8.1 / 10 are registered trademarks of the Microsoft
Corporation. Macintosh and MAC are registered trademarks of Apple Computer. All
trademarks and names of third parties are property of the respective user.
Page 3 of 4 GB