topmark 2 COMBI T8030 Mode D'emploi page 21

ASSEMBLING/USING
Release lock (1) and place the wheel into axle (2).
1
2
To remove rear wheel release lock (1) and pull wheel
out to remove it (2).
EN
Note: Rear wheels are air wheels.
1
Before use check the wheel pressure and inflate
2
wheels at a maximum pressure of 2.0 Bar.
Insufficiently inflated wheels can lead to unnecessary
damage and wear.
ATTENTION: When you travel by airplane always
deflate the air wheels otherwise the air wheels can
burst out due to the pressure difference.
If you have leak air wheel you can replace the inner tube or
repair it. Use a tire repair set and a plastic lever.
TO USE REAR BRAKE
Step down on the brake bar to engage brake
mechanism (1).
Lift up the brake bar to unlock the brake (2).
1
WARNING: The parking device shall be
engaged when placing and removing the
2
children.
21