BORETTI SH RANGE Notice D'emploi page 16

Using the extractor
Operation
When the appliance is switched off, pressing any button activates the standby function and the
symbols are illuminated with a soft light so that you can see the functions and set them. Pressing
one of the buttons activates the relevant function, and the symbol lights up in blue. In order to
save energy, the operating system is provided with a device that returns the buttons to the idle
setting after all functions have been switched off and illuminates them with soft light for about 30
seconds, after which they switch off.
The extraction hood has 6 buttons:
A
A: BORETTI LUMINA LED Lighting on/off
B: Motor on/off
C: Reduce motor speed
D: Increase motor speed
E: Delay switch
F: Replace carbon filter /clean grease filter indicator
Motor
The motor has 4 settings. The display indicates
the selected setting as follows:
Setting 1: Button C flashes and lights up in
blue
Setting 2: Button C lights up in blue
Setting 3: Button D lights up in blue
Setting 4: Button D flashes and lights up in
blue
Heat sensor
When the extractor is used in the automatic
mode, the motor speeds are switched auto-
matically by means of a heat sensor fitted in
the hood. This mode is recommended only for
intensive use of the cooking surface (when two
or more cooking zones or burners are in use).
The automatic mode is activated by pressing
buttons C and D at the same time. The extrac-
tor operates automatically and the heat sensor
automatically adjusts the motor speed to the
temperature of the cooking surface. Button B
16
B C D
flashes to indicate that the heat sensor is on.
To return to manual operation, press buttons C
and D simultaneously again. The correct opera-
tion of the heat sensor depends on the distance
between the hood and the cooking surface. The
greater the distance, the less sensitive the
sensor becomes.
Delay switch
Your extraction unit has a delay switch. The
delay switch is a timer that will switch off the
extractor after a number of minutes and allows
you the option of keeping the extractor running
after you have finished cooking in order to re-
move the last cooking odours from the kitchen
while you are enjoying your meal.
You can set the delay by pressing button E.
Pressing the button once will set the timer at
five minutes and button E will flash once re-
peatedly; pressing it the second time will set
the timer at 10 minutes and button E will flash
twice repeatedly and pressing it for the third
E F