Hot Surface - TDK-Lambda CM4 Série Manuel D'utilisation

CM4 Series Instruction Manual
The unit cover(s)/chassis must not be made user accessible.
CAUTION: DOUBLE POLE/NEUTRAL FUSING
The mains input connector is not acceptable for use as field wiring terminals.
An internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit must be returned to
TDK-Lambda UK LTD or one of their authorised agents.
A suitable mechanical, electrical and fire enclosure must be provided by the end use equipment for mechanical, electric shock
and fire hazard protection.
Energy Hazards:
Certain modules are capable of providing hazardous energy (240VA) according to output voltage setting. Final equipment
manufacturers must provide protection to service personnel against inadvertent contact with these module output terminals. If set
such, that hazardous energy can occur, then the module terminals or connections must not be user accessible.

HOT SURFACE

External Hot Surfaces:
In accordance with local regulations for Health and Safety at work, manufacturers have an obligation to protect service engineers
as well as users. In order to comply with this, a label must be fitted to these products which is clearly visible to service personnel
accessing the overall equipment, and which legibly warns that surfaces of these products may be hot and must not be touched
when the products are in operation.
The unit may be mounted in any orientation except inverted (mounted on its top) or vertical with the airflow downwards.
The unit cover/chassis is designed to protect skilled personnel from hazards. They must not be used as part of the external
covers of any equipment where they may be accessible to operators, since under full load
conditions, part or parts of the unit chassis may reach temperatures in excess of those considered safe for operator access.
2 260417-6 Aug 2019