Preparing For Use - Wellcare WE-167UBAHD Mode D'emploi

8. Electric underblanket
(dense 4D DWF holes are designed for the feet
area to provide additional warmth)

PREPARING FOR USE

(please see fig.B for demonstration of single size)
1. Lay the electric underblanket (8) smoothly on
your mattress without any folds, creases or
ruck-up.
2. The area with dense 4D DWF holes is
especially for feet, please lay this part on the
foot end of your mattress.
3. The head area does not need to be heated.
4. Connect the detachable plug-in connector (6)
to the connection box (7).
(For double-size blanket, please remember to
couple both plug-in connectors to the
connection boxes)
5. Cover the electric underblanket and the
mattress with the sheet, make sure the blanket
is completely flat and the controller(s) (2-1, 2-2)
is not covered by the sheet, pillow or any objects.
6. Plug the mains cable(s)(1) to the socket.
EN
11