Accessories; Lamp Replacement - Welch Allyn LumiView Instructions De Fonctionnement

Accessories

Pneumatic Speculum Holder
• A pneumatic speculum holder with a 
4x's magnification lens can be used
to aid in examination of the ear.

Lamp Replacement

CAUTION: Lamps may become very HOT. Be sure to allow lamps to
cool before changing.
• To change the lamp, flip the binocular assembly into its up position.
• Remove the reflector assembly by placing the thumb on the notch located on the
bottom of the reflector housing and pushing the reflector assembly. (Step 1)
• Remove lamp and insert a new Welch Allyn lamp No. 08500 into the back of the
reflector. (Step 2)
• Replace reflector housing into instrument and push until it snaps into place.
NOTE: Reflector assembly air vents should be positioned top and bottom.
Step 1
10
Step 2