Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Pick location of setup - Choose Location with greatest sunlight throughout the day
2. Setup PVC support frame
3. Place panels
4. Connect panels to 4 in1 connector
5. Connect extension to 4 in 1 connector
6. Connect to charge controller
7. Connect charge controller to battery
8. Connect either 12VDC socket to battery to use 12V items or the included inverter to use AC items.
9. Generate Power!
INSTALLATION STEPS
1. Pick Location
Choose Location with greatest sunlight throughout the day.
2. Setup PVC support Frame. Place all parts together and secure with included screws. Be sure that all
screws are tight and solid.
3. Place Panels
Place panels one by one with wire hanging from top part of frame. Use included screws to secure panels
to frame.
4. Connect wires from panels to 4 to 1 connector – refer to image #10
5. Connect extension to 4 in 1 connector. Make sure connections are all tight. See image #3.
Publicité
Table des Matières
